I've followed several tutorials on how to setup SSH through USB for my raspberry pi zero w. I've followed https://www.thepolyglotdeveloper.com/2016/06/connect-raspberry-pi-zero-usb-cable-ssh/ and https://www.youtube.com/watch?v=xj3MPmJhAPU which says the same things.
My raspberry pi zero W with raspbian appears on the wired connections on Ubuntu, and I can even connect to it. I activated it with ON and it displays connecting forever.
Look at my ifconfig on my laptop:
enp0s20f0u1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::5c6d:6621:10ce:3c88 prefixlen 64 scopeid 0x20<link>
ether 1e:df:87:0b:23:bf txqueuelen 1000 (Ethernet)
RX packets 368 bytes 17203 (17.2 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 110 bytes 21428 (21.4 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Looks like my rasberry pi appears on my ubuntu with the ipv6 fe80::5c6d:6621:10ce:3c88. I even found out how to connect through ipv6 on ssh:
ssh -6 pi@fe80::5c6d:6621:10ce:3c88%enp0s20f0u1
but I always get connection refused.
Does anybody have any idea of how to do it?
UPDATE: I also tried https://raspberrypi.stackexchange.com/a/73665/74564 with no success. I see no IP information on ifconfig or the network GUI manager
UPDATE: I had to add an IP to the raspberry pi ethernet device. This answer is complete: https://raspberrypi.stackexchange.com/a/83647/74564
