0

In ls /sys/bus/w1/devices/ I only have w1_bus_master1

I have added w1-gpio and w1-therm in /etc/modules

I have also added dtoverlay=w1-gpio in /boot/config.txt

I am not sure what is wrong. The RP 4 doesn’t detect the device

Here are photos of my gpio readall and the wiring: https://imgur.com/a/qu5o4h0

Does anyone have any advice or solutions? Thanks :)

If it helps, I’m following the tutorial on making a weather station from the raspberry pi website

Alex
  • 1
  • Here are photos of my gpio readall and the wiring: not very useful ... wiring diagram (hint: schematic) would be better – Jaromanda X Jul 20 '23 at 03:25
  • this might help: https://raspberrypi.stackexchange.com/questions/111412/rpi3b-python-ds2482-i2c-to-1-wire-bridge-connecting-10-ds18b20-temperature-sen/119865#119865 – tlfong01 Jul 20 '23 at 06:47

0 Answers0