There is the little trick of connecting pin 5-6 to load in recovery mode.
Is there an equivalent trick I missed to shutdown properly the pi using only a jumper ?
There is also the p6 connector, is it a hard-reset, or a soft one ?
Thanks
Asked
Active
Viewed 50 times
0
-
See http://raspberrypi.stackexchange.com/questions/13203/creating-halt-wake-button/13214#13214 – Gerben Feb 07 '14 at 13:42
-
p6 is a hard reset of the broadcom chip. – Gerben Feb 07 '14 at 13:42